HOT ! 【SALE／10%OFF Kawasaki ZX-9R ZX9R Ninja 1998-1999 Slip On 9″ Oval Carbon Exhaust

• 1 Set Scarf Protector Kit / Color: Black / Length: 100mm
• Product feedback from racing scenes minimizes damage to the muffler if it falls or falls. It is a type that can be tightened to the fixed part of the silencer band, so if you have a scarf that is secured with a silencer band, you can also wear it in combination with other companies
• The protector is made of resin (special plastic), the brackets are machined from solid aluminum wood, and the included bolts and nuts. The included 5mm thick collar allows you to adjust the amount that protrude the protector to the outside of the scarf. Includes 3 0.2 inch (5 mm) thick colors. Supports silencer diameters from 90mm to 120mm
• The fixed bolt size is M8 (screw diameter 8mm). It cannot be attached to the M10 (screw diameter 0.4 inch (10 mm)). The thickness of the protector + bracket will be 35mm
• The bolt projection will be 15mm if used with 50mm bolts. If you use 3 of the included 0.2 inch (5 mm) thick colors, the protrusion will be 0 mm and will not be fixed in place. The length of the thread on the part where the fixing nut is attached, should be approximately 10mm. Includes a wirswin sticker

Product Description

1 set of Universal Special Parts Muffler Protector Kit Black
Product feedback from racing scenes minimizes damage to the muffler if it falls or falls.
It is a type that can be tightened to the fixed part of the silencer band, so if you have a scarf that is secured with a silencer band, you can also wear it in combination with other companies.
The protector is made of duracon (special plastic), the brackets are machined from solid aluminum wood, and the included bolts and nuts are made of stainless steel.
The included 5mm thick collar allows you to adjust the amount that protrude the protector to the outside of the scarf. Includes 3 0.2 inch (5 mm) thick colors. Supports silencer diameters from 90mm to 120mm.
The fixed bolt size is M8 (screw diameter 0.3 inches (8 mm)). It cannot be attached to the M10 (screw diameter 0.4 inch (10 mm)).
The thickness of the protector + bracket will be 35mm.
The bolt projection will be 15mm if used with 50mm bolts. If you use 3 of the included 0.2 inch (5 mm) thick colors, the protrusion will be 0 mm and will not be fixed in place.
The length of the thread on the part where the fixing nut is attached, should be approximately 0.4 inches (10 mm).
Includes a wirswin sticker

Safety Warning

The fixed bolt size is M8 (screw diameter 0.3 inches (8 mm)). It cannot be attached to the M10 (screw diameter 0.4 inch (10 mm))